|
Injector Type |
Flow Rates and applications |
What you're buying... |
Price
/ Code |
|
***TBI Injectors |
An injector that's
cleaned, flow matched to a set (2 for TBI and 4-8 for other
applications) and calibrated for your application. |
***Cleaned and flow
matched TBI injectors--yours or a core set. We require your old
injectors as cores. |
$69.95 each WK |
|
***TBI Injectors |
New and flow matched to a set (2
required for TBI) and calibrated for your application. |
Outright purchase--no
cores required. |
$229.95 each WK |
|
***TBI Injectors |
78.8
lb/hr TBI Injectors GM 1987-1995 TBI Car & Truck |
***Purchase outright--no core--these are brand new units, not
reflowed or remanufactured. |
$249.00 each WK |
|
***Delphi Multec II |
Flow
matched injectors for stock 1999-2005 4.8L, 5.3L, 6.0L and 8.1L
Silverado trucks -- All injectors are within 1% factory tolerance
with each other when shipped.
|
***Cleaned and flow matched PFI injectors--yours or a core set. We
require your old injectors as cores.
2 or 4 orifice
injectors available
|
$19.95 each SD |
|
***Delphi Multec II
|
44lb/hr units @ 58 PSI--perfect for Supercharged applications
1999-2006 GM trucks.
We recommend these injectors when doing a Whipple
upgrade to eliminate additional controllers. |
***Purchase outright--no core-- |
$78.00 each WK |
|
***Delphi 01D030B
|
Static Flow Rate: 42.29 lb/hr @ 43.5PSI for LT1and TPI GM
These are new units. |
***Purchase outright--no core |
$79.00 each WK |
|
1996-2000 Vortec 5.0L 5.7L CPI
|
OE
Static Flow Rate: (22lb/hr) -- Our sets flow (28lb/hr)
*Flow Matched CPIWill Support up to
440 Crank HP |
***Purchase
requires Core |
$469.00 SET
Core $200.00 |
|
Vortec 4.3L
|
OE
Static Flow Rate: (22lb/hr) -- Our sets flow (26lb/hr)
*Flow Matched CPIWill Support up to
312 Crank HP |
***Purchase
requires Core |
$469.00 SET
Core $200.00 |
|
|
|
|
|
|
* for forum gurus who have nothing better to do other than
misquote us, these sets are flow matched, and the pressure
increase provides the proper flow rate. CPI injectors are CPI
injectors. These injector sets require ECM reprogramming or you
will damage your engine. Fuel pressure must be a minimum of 55 PSI or the poppets may not open--they DO NOT OPEN at 50 PSI. CPI
injectors do NOT fail at high pressure, like regular rail type
injectors do, or like the upgraded replacement set you can
purchase from GM.
|